subscribe

Free CCNA Labs: Initial Switch and LAN Configuration: Exam Prep with Brian Gallagher

Get your FREE CCNA Lab: Initial Switch and LAN Configuration: Can you get 100% for this lab?

Free Lab Guide: http://bit.ly/2G4dKpU
Free Packet Tracer Lab File – assessment (version 7.2): http://bit.ly/2K7rVhF
Free Packet Tracer Lab File – answers (version 7.2): http://bit.ly/2I2KUbm

Playlist: http://bit.ly/2J8VFup

#CCNA #CCENT #FreeLabFriday

In this simulation scenario, you have recently joined the Cisco Partner as a Jnr. Network Engineer. You have been asked by the Senior Network Architect to complete your first client network installation, configuration and verification on your own.

The client is Sirius Cybernetics Corp. They have asked for a new small office LAN network to be installed and configured as per the design documentation. This will be an ongoing projectfor you and the initial LAN setup and configuration involves connecting the client PCs to the new Switch hardware installed recently on site. You will be expected on site over the weekend
to configure the PC clients with their IP address information, connect the PCs to the wired network and configure the basic parameters of the two new Cisco Switches and the connection to the previously installed and configured router. The router does not need configured at this time – it was configured prior to being sent to site.

Specifically, you will need to ensure the following if configured and verified in order to successfully complete the installation as well as receive the 100% in this Packet Tracer Assessment Lab scenario