Packet Tracer file (Version 7.1): https://goo.gl/E5uk4W
Get the Packet Tracer course for only $10 by clicking here: https://goo.gl/vikgKN
Get my ICND1 and ICND2 courses for $10 here: https://goo.gl/XR1xm9 (you will get ICND2 as a free bonus when you buy the ICND1 course).

This one of multiple NAT & PAT labs, Can you complete this CCNA Exam Lab?
Labs! Labs! And more Labs! Get the hands on experience to pass your CCNA exam!

This is a static NAT lab. Were you able to configure the network with static NAT?

Learn how DNS works, how NAT works and much more. How to NAT protocols like HTTP and FTP? Learn in this course.

Make sure you are ready to pass the CCNA exam! Prepare practically for the Cisco CCNA certification which is the most in-demand networking certification in the world today! Make sure you can pass the Cisco CCNA Routing and Switch 200-125 exam!

This course tests your knowledge of CCNA topics with practical, hands on labs. Labs include both configuration as well as troubleshooting labs.

Ask yourself these questions:
– Are you ready and prepared for the labs in the CCNA exam?
– Are you able to troubleshoot Cisco networks?
– Are you confident with your ability to configure networks as required by Cisco to pass the CCNA?

Answer:
This course helps you prepare for the exam and gain the confidence to pass the exam!

There are many topologies and many labs in this course!

Transcription:

In this lab, you need to configure both static and dynamic NAT.

You need to configure the network so that a host on the internet connects servers on the internal network and you need to configure the network so that host on the inside or internal network can access servers on the internet.

Configure the router with these details and then configure static NAT so that this PC on the outside can access the HTTP and FTP server based on these details.

HTTP server external IP address 8.8.8.200
FTP server 8.8.8.201
You can see the IP addresses of the servers by looking at this server configuration.

In addition, you need to configure dynamic NAT using the router’s external IP address so that internal hosts are natted to this IP address using Port Address Translation on the interface and then you need to verify that the internal PCs can access the internet servers using their DNS names.

So, as an example are Cisco.com and Facebook.com.

So in summary, this PC should able to access both the HTTP and FTP server using the DNS name myhttp.com and myftp.com and this PC should be able access Cisco.com and Facebook.com using the domain names.

Verify that these two PCs can open up web browser to both Cisco and Facebook and verify that the outside PC can open up a web browser to the HTTP server and an FTP connections to FTP server.

So can you complete this lab?
Download the attached packet tracer file and see if you can complete the lab yourself. If you are unsure, have a look at the next video where I complete the lab.